Tray Use in print mode
You can change the default tray the machine will use for printing from your computer.
a Press Menu, 1, 6, 3.
16.Tray Use
3.Print
aMP>T1
b T1>MP Select ab or OK
b Press a or b to choose Tray#1 Only,
Tray#2 Only 1, MP Only,
Press OK.
1Tray#2 Only or T2 appears only if the optional tray is installed.
c Press Stop/Exit.
Note
•The setting in the printer driver will take priority over the setting made on the control panel.
•If the control panel is set to
Tray#1 Only, MP Only or
Tray#2 Only 1 and you choose Auto Select in the printer driver, the machine pulls the paper from that tray.
1Tray#2 Only appears only if the optional tray is installed.
General Setup
Volume settings
Ring volume
You can choose a ring volume level from a range of settings, from High to Off.
While in Fax mode press or to adjust | 3 |
the volume level. The LCD will show the |
current setting, and each key press will change the volume to the next level. The machine will keep the new setting until you change it.
You can also change the ring volume through the menu:
a Press Menu, 1, 3, 1.
13.Volume
1.Ring
aMed
b High Select ab or OK
b Press a or b to choose Off, Low, Med or
High. Press OK.
c Press Stop/Exit.
Beeper volume
When the beeper is on, the machine will beep when you press a key, make a mistake, or after you send or receive a fax. You can choose a range of volume levels, from High to Off.
a Press Menu, 1, 3, 2.
13.Volume
2.Beeper
aMed
b High Select ab or OK
b Press a or b to choose Off, Low, Med or
High. Press OK.
c Press Stop/Exit.
25