Before Use
2.Click Run setup.exe.
→The User Account Control dialog box appears.
3.Click Yes.
→After a short while, the following dialog box automatically appears.
4.Select the desired language, and then click OK.
→The InstallShield Wizard starts up, and the first dialog box appears.
5.Click Next to continue with the installation.
→A dialog box appears, allowing you to select the folder where the software will be installed.
6.Check the installation location, and then click Next.
b Memo:
To install the application into a different folder:
1)Click Change.
2)In the Change Current Destination Folder dialog box that appeared, select the drive and folder. (If necessary, type in the name of a new folder.)
3)Click OK.
→The Destination Folder dialog box of the InstallShield Wizard shows the selected folder.
4)Click Next to install the application into the selected folder.
→A dialog box appears, indicating that preparations for installation are finished.
7.Click Install to install the application.
→When the installation is completed, the following dialog box appears.
Before Use
7
