15. ERROR CODES
<Communication and memory-related errors>
Code | Cause and remedy | |
Err 401 | Communication error with motor CPU was detected when the power was turned on. Turn off the power switch | |
and then turn the power back on again. | ||
| ||
| Connection error with needle zigzag PMD P.C. board detected when power was turned on. Turn off the power | |
Err 403 | switch, and then check that connector P1 on the PMD P.C. board and connector P31 on the main P.C. board | |
| are properly connected. | |
Err 411 | Communication error with motor CPU detected. Turn off the power switch and then turn the power back on | |
again. | ||
| ||
Err 413 | Communication error with needle zigzag PMD P.C. board detected. Turn off the power switch and then turn the | |
power back on again. | ||
| ||
Err 420 | No CF card is inserted. | |
Err 421 | Program number on CF is invalid, or no data exists. | |
Change program No. | ||
| ||
Err 422 | Error occurred while reading CF card. | |
Check the data on the CF card. | ||
| ||
Err 424 | Insufficient free space on CF card. Use a different CF card. | |
Err 425 | Error occurred while writing to CF card. | |
Use the specified type of CF card. | ||
| ||
Err 427 | R/W key unneeded error | |
Err 430 | Problem with flash ROM data on main P.C. board. | |
Turn off the power switch and then turn the power back on again. | ||
| ||
Err 440 | Data cannot be backed up to EEPROM. | |
Turn off the power switch and then turn the power back on again. | ||
| ||
Err 441 | Data cannot be read from EEPROM. | |
Turn off the power switch and then turn the power back on again. | ||
| ||
Err 442 | Incorrect data initialized into EEPROM. | |
Turn off the power switch and then turn the power back on again. | ||
| ||
Err 450 | Problem with data in machine head memory. (Model selection cannot be read.) | |
Turn off the power switch and then turn the power back on again. | ||
| ||
Err 452 | Machine head memory is not connected. | |
Turn off the power switch and then turn the power back on again. | ||
| ||
Err 474 | Internal memory is full and copying is not possible. |
<Data editing-related errors>
Code | Cause and remedy | |
Err 510 | Problem with sewing data. (Invalid code in sewing data.) | |
For additional data, | ||
| ||
Err 512 | Number of stitches exceeds allowed maximum. |
115 |