[2] Notes on safety

DANGER

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury.

CAUTION

Environmental requirements

Use the sewing machine in an area which is free

The ambient temperature should be within the

from sources of strong electrical noise such as

range of 5°C to 35°C during use.

high-frequency welders.

Temperatures which are lower or higher than this

Sources of strong electrical noise may cause

may cause problems with correct operation.

problems with correct operation.

The relative humidity should be within the range of

Any fluctuations in the power supply voltage

45% to 85% during use, and no dew formation

should be within ±10% of the rated voltage for the

should occur in any devices.

machine.

Excessively dry or humid environments and dew

Voltage fluctuations which are greater than this

formation may cause problems with correct

may cause problems with correct operation.

operation.

The power supply capacity should be greater than

In the event of an electrical storm, turn off the power

the requirements for the sewing machine's

and disconnect the power cord from the wall outlet.

electrical consumption.

Lightning may cause problems with correct

Insufficient power supply capacity may cause

operation.

problems with correct operation.

 

Installation

Machine installation should only be carried out by

When securing the cords, do not bend the cords

a qualified technician.

 

 

 

 

 

excessively or fasten them too hard with staples,

Contact

your

Brother dealer

or

a

qualified

otherwise there is the danger that fire or electric

shocks could occur.

electrician for any electrical work that may need to

 

be done.

 

 

 

 

 

 

 

If using a work table which has casters, the casters

The sewing machine weighs more than 50 kg. The

should be secured in such a way so that they

cannot move.

installation should be carried out by two or more

 

people.

 

 

 

 

 

 

 

Use both hands to hold the machine head when

Do not connent the power cord until installation is

tilting it back or returning it to its original position. If

only one hand is used, the weight of the machine

complete. The machine may operate if the treadle

head may cause your hand to slip, and your hand

is depressed

by mistake, which could

result in

may get caught.

injury.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Be sure to wear protective goggles and gloves

Turn off

the

power

switch before

inserting

or

when handling the lubricating oil and grease, so that

removing

the

plug,

otherwise

damage

to

the

they do not get into your eyes or onto your skin,

control box could result.

 

 

 

 

 

 

 

 

otherwise inflammation can result.

 

 

 

 

 

 

 

 

Be sure to connect the ground. If the ground

Furthermore, do not drink the oil or eat the grease

connection is not secure, you run a high risk of

under any circumstances, as they can cause

receiving a serious electric shock, and problems

vomiting and diarrhea.

with correct operation may also occur.

 

 

 

Keep the oil out of the reach of children.

ii

Z-8550A, 8560A