4. USING CF CARDS
4-8. Updating the control program version
0197B
1 | Carry out steps 1 to 3 in |
|
|
2 | Select [r 7] in CF data read/write mode. |
|
|
|
|
| 0206B |
|
|
|
|
3 |
|
|
|
| Version number for control program saved on CF card | 0207B | |
|
|
| |
|
|
|
|
4 |
|
|
|
| Version updating in progress | Complete when [End] is displayed | |
| NOTE: |
|
|
| * Version updating takes a maximum of 60 seconds. (The time taken will vary depending on the manufacturer and | ||
| storage capacity of the CF card being used.) |
|
|
| * Never remove the CF card or turn off the power switch while reading of the CF card is in progress. | 0208B | |
| * If the filename and folder name for the control program are incorrect, error [Err 421] will be displayed. | ||
|
| ||
5 | Set the power switch (1) to OFF and remove the CF card. |
|
|
|
|
| 0196B |
|
|
|
|
29 |