3. FUNCTION SETTINGS
No. | Initial value | Setting range | Setting details | |
|
|
| Operation during standing operation when AUTO function is on | |
47 | 0 | 0 - 1 | 0: When | |
is resumed when pedal turns off. | ||||
|
|
| 1: Above function is disabled | |
|
|
| This function is disabled when No. 49 is set to “1”. | |
|
|
| Thread trimming pedal operation during standing operation after thread | |
48 | 0 | 0 - 1 | trimming | |
0: Presser foot can be lifted and lowered | ||||
|
|
| ||
|
|
| 1: Above operation is disabled (only possible using presser foot lifter pedal) | |
|
|
| Alternating operation of standing operation pedal and treadle | |
|
|
| (Does not include operation of presser foot lifter pedal. In the case of | |
49 | 0 | 0 - 1 | simultaneous operation, the standing operation pedal has priority.) | |
0: Treadle operation is disabled after standing operation pedal has been | ||||
|
|
| used | |
|
|
| 1: Treadle operation is still enabled after standing operation pedal has been | |
|
|
| used (alternating operation is possible) | |
51* | 0 | 0 - 1 | Correction sewing using actuator switch after thread trimming | |
0: Forbidden (switch operation disabled) | ||||
|
|
| 1: Possible | |
52 | 2 (stitches) | 1 – 99 | Number of slow start stitches | |
(stitches) | ||||
|
|
| ||
53* | 10 (stitches) | 0 - 100 | Counting units for stitch counter display | |
0: No counting operation | ||||
(stitches) | ||||
|
| |||
|
|
| ||
|
|
| Stitch counter warning operation (when (!) icon is displayed) | |
|
|
| 0: Starting using treadle is always enabled | |
54* | 1 | 0 - 2 | 1: Starting using treadle prevented (thread trimming is possible when | |
treadle is depressed backward) | ||||
|
|
| ||
|
|
| 2: Operation using treadle fully prevented when treadle is returned to | |
|
|
| neutral position and sewing stops | |
|
|
| Operation when treadle is depressed backward or knee switch operation | |
55 | 0 | 0 - 1 | when presser foot is lifted | |
0: Presser foot lifts when treadle is returned to neutral position | ||||
|
|
| ||
|
|
| 1: Presser foot lowers when treadle is returned to neutral position | |
|
|
| Function for preventing accidental forward depression of the treadle to | |
56 | 0 | 0 - 1 | cause the needle bar to move after the treadle has been depressed | |
backward and is then returned to the neutral position | ||||
|
|
| 0: Yes | |
|
|
| 1: None | |
|
|
| Operation when treadle is depressed forward to the 1st step when the | |
57 | 0 | 0 - 1 | presser foot is lifted | |
0: Presser foot is lowered | ||||
|
|
| ||
|
|
| 1: Presser foot is not lowered | |
58 | 0 | 0 - 1 | Presser foot soft lift function | |
0: None | ||||
|
|
| 1: Yes (Settings for No. 59 and No. 60 are required.) | |
|
|
| Presser foot soft lift timer setting | |
59 | 0 (ms) | 0 - 150 (ms) | (When No. 58 is set to “1”) | |
| ||||
|
|
| Presser foot lifting | |
60 | 0 (ms) | 0 - 99 (ms) | ||
(Fully on) | ||||
|
|
| 2247M | |
|
|
|
|
* : Settings indicated with * are enabled after the power is turned off and then back on again.
7 |