Canon K10158 manual Esc E

Function	ASCII	Dec.	Hex.
Set vertical tabs	ESC B n1...n64 NUL	0 27 66 n1...n64 0	1B	42 n1...n64 00
n1 ... n64 = line numbers for tab stops
n = 1 to 255 lines
Set page length in lines *2	ESC C n	27 67 n	1B	43 n
n = line numbers on a page
n = 1 to 255
Set page length in inches *2	ESC C NUL n	27 67 0 n	1B	43 00 n
n = inches for a page
n = 1 to 255
Set horizontal tabs	ESC D n1...n28 NUL	27 68 n1...n28 0	1B	44 n1...n28 00
n1 ... n28 = columns for tab stops
Set emphasised mode	ESC E	27 69	1B	45
Cancel emphasised mode	ESC F	27 70	1B	46

Cancel printing in twice the normal dot density.

Set by ESC E.

C

Set double-strike mode	ESC G	27 71	1B	47
Cancel double-strike mode	ESC H	27 72	1B	48
Select font pitch and print mode	ESC I n *3	27 73 n	1B	49 n
Perform graphics line spacing	ESC J n	27 74 n	1B	4A n
Line spacing amount becomes n/216 when FUNCTION 12 is OFF;
Line spacing amount becomes n/180 when FUNCTION 12 is ON;
n = 0 to 255
Set normal density image graphics mode
	ESC K n1 n2 data	27 75 n1 n2 data	1B	4B n1 n2 data
Set double density image graphics mode
	ESC L n1 n2 data	27 76 n1 n2 data	1B	4C n1 n2 data
Set perforation skip	ESC N n	27 78 n	1B	4E n
n = 1 to 255 lines
Cancel perforation skip	ESC O	27 79	1B	4F

*2 Since the maximum page length for the printer is 20 inches, when the specified value is more than 20 inches, the page length is set to 20 inches.

*3 n = 0: Draft 10 cpi (default: created from Gothic 10 cpi) n = 2: Letter Quality 10 cpi (Courier 10 cpi)

n = 3: Letter Quality Proportional (Courier Proportional)

n = 4: Download Draft 10 cpi

n = 6: Download Letter Quality 10 cpi

n = 7: Download Letter Quality Proportional

n = 8: Draft 12 cpi (created from Gothic 10 cpi)

n = 10: Letter Quality 12 cpi (created from Prestige 10 cpi)

n = 12: Download Draft 12 cpi (created from download Draft 10 cpi)

n = 14: Download Letter Quality 12 cpi

n = 16: Draft 17 cpi (created from Gothic 10 cpi)

n = 18: Download Letter Quality 17 cpi (created from Courier 10 cpi)

n = 20: Download Draft 17 cpi (created from download Draft 10 cpi)

n = 22: Download Letter Quality 17 cpi (created from download Letter Quality 10 cpi) n=Else:Command ignored

•Internal fonts are used if the characters are not downloaded.

•When 48-dots font is downloaded and 2, 3, 10, or 18 is set to n, font created from the current font.

•When Draft font is selected using the printer control panel, the Courier font is used.

Appendix C Printer Command Summaries 117