•With Canon
•The Paper and Graphics control sheets contain the settings for setting up a print job. For details, refer to the Windows Print Guide.
•On the Paper tab, check the Paper Feed setting and make sure that it is set for Manual Feed. If this setting is set for Auto Feeder, click Manual Feed.
To open the printer driver for Windows 3.1
•In your software application, pull down the Print Setup menu to open the Print Setup dialog.
•If the
Specific Printer button, click the | 3 |
below the Specific Printer heading, and select
•Click the Options button.
•The Paper and Graphics tabs contain the settings for setting up a print job. For details, refer to the Windows Print Guide.
•On the Paper control sheet, check the Paper Feed setting and make sure that it is set for Manual Feed. If this setting is set for Auto Feeder, click Manual Feed.
To check the settings for a DOS application
•Open the DOS software application and start the print setup procedure so you can set or adjust the settings for the print job. For details, refer to your DOS software application instructions.
2.Make sure the printer driver and software application are set up for the media you are going to print on. On the Paper control sheet of
the Windows printer driver, make sure the following items are set correctly:
•For Media Type, the type of media should be selected (Plain Paper, Coated Paper, Transparency, etc. ).
•For Paper Size, the appropriate Size should be selected for the sheet you are loading (A4, Letter, etc.)
•For Orientation, make sure Portrait is selected.
•For Paper Feed, select Manual.
•For Graphics, you may want to click the Graphics tab to select a setting appropriate for the content of the image on the Graphics control sheet.
•For details, refer to the Windows Print Guide and the instructions you received with your print media packet.
Chapter 3 Paper Handling 41
