Canon K10158 Operation panel, Auto Sheet Feeder ASF-50 connector, Power connector, Battery pack

Operation panel

Allows you to operate some functions.

Auto Sheet Feeder ASF-50 connector

Connects the optional Auto Sheet Feeder ASF-50 to the printer.

Power connector

Connects the printer to the AC adapter.

Power lock switch

After the power lock switch is slid to the right, you can press the POWER button to switch the printer on and off. After the power lock switch is slid to the left, you cannot switch the printer on, even if you press the POWER button. This prevents the printer from being switched on accidentally while it is being transported. Before transporting the printer, always slide the power lock switch to the left. Otherwise, leave the power lock switch at the right position so you can operate the POWER button normally to switch the printer on and off.

Battery pack

The Canon Li-Ion Battery LB-50 provides power to the printer when the AC adapter is not connected. When the AC adapter is connected, the printer is powered from the AC adapter. When the battery pack requires recharging, the CHARGE/ERROR lamp will start flashing green. To recharge the battery pack, connect the AC adapter to the printer and to a power outlet. When the battery pack is fully charged, the CHARGE/ERROR lamp will go off.

Battery pack release

Push to the right to release the battery pack so you can remove it. Do not remove the battery pack unless you are going to store the printer for a prolonged period (three months or more).

Front cover

When closed, covers the battery pack. Folds down so you can feed paper and other media to the printer. Open the front cover only when you are feeding paper or other media into the printer.

Feed slot

Allows you to feed one sheet of paper or other media for printing. Always align the left edge of the sheet with the left side of the feed slot.

16Chapter 2 Setting Up the Printer