Canon K10158 manual Operational problems, Printer does not switch on

■Operational problems

This section describes solutions to various problems you may have with the operation of your printer. Each section contains several solutions. Try them in the order listed.

Printer does not switch on

When you switch on the printer, the POWER lamp flashes until automatic print head cleaning is completed. The POWER lamp lights and stays on when the printer is ready for normal operation. If the POWER la0mp is not on, the printer is not receiving power.

1. If the power lock switch is in the left position, slide it to the right.

When the power lock switch is in the left position, it locks the power switch off so it cannot be switched on accidentally during transportation.

2. If the AC adapter is not attached, check the CHARGE/ERROR lamp. If the CHARGE/ERROR lamp lights orange, this means the battery pack requires charging. Switch off the printer and connect the AC adapter. The CHARGE/ERROR lamp will remain illuminated green until the battery pack is completely recharged.

If you want to use the printer immediately, just connect the AC adapter 7

and use the printer. When you switch off the printer, leave the AC adapter connected so the battery pack will be continue recharging.

3.

4.

If the AC adapter is connected and the POWER lamp is not on, check the AC adapter connector on the right side of the printer and make sure it is completely inserted into the printer.

Make sure the AC adapter is plugged securely into a power outlet. If the AC adapter is connected to a power strip, make sure that the power strip is switched on and connected to a power outlet.

Chapter 7 Troubleshooting 87