Canon K10158 manual Basic control codes, ESCape sequence codes

Basic control codes

Function	ASCII	Dec.	Hex.
End command	NUL	0	00
Sound beeper	BEL	7	07
Backspace	BS	8	08
Horizontal tab control	HT	9	09
Move to next tab.
Perform line feed	LF	10	0A
Vertical tab control	VT	11	0B
Move to next tab.
Perform form feed	FF	12	0C
Carriage return	CR	13	0D
Set double-wide mode by line	SO	14	0E
Set condensed mode (17 cpi)	SI	15	0F
Cancel by DC2.
Select printer	DC1	17	11
Set 10 cpi mode	DC2	18	12
Cancel double-wide mode	DC4	20	14
Cancel data	CAN	24	18
Insert space	SP	32	20
Delete character	DEL	127	7F

ESCape sequence codes

Function	ASCII	Dec.	Hex.
Set/cancel underscore mode	ESC _ n	27 45 n	1B	2D n
n = 0:End underscore
n = 1:Start underscore
Set 1/8 inch line spacing	ESC 0	27 48	1B	30
Set 7/72 inch line spacing	ESC 1	27 49	1B	31
Enable line spacing by ESC A	ESC 2	27 50	1B	32
Set graphics line spacing	ESC 3 n	27 51 n	1B	33 n
in n/216 inch increment when FUNCTION 12 is OFF;
in n/180 inch increment when FUNCTION 12 is ON (AGM mode);
n = 1 to 255
Set top of form	ESC 4	27 52	1B	34
Set/cancel automatic line feed	ESC 5 n	27 53 n	1B	35 n
n = 0:End automatic line feed
n = 1:Start automatic line feed
Select Character Set 2	ESC 6	27 54	1B	36
Select Character Set 1	ESC 7	27 55	1B	37
Set 12 cpi mode	ESC :	27 58	1B	3A
24 dot font image download	ESC = n1 n2 id	27 61 n1 n2 id	1B	3D n1 n2 id
id = 35 or 36	r1 r2 data	r1 r2 data	r1 r2 data
48 dot font image download	ESC = n1 n2 id	27 61 n1 n2 id	1B	3D n1 n2 id
id = 37	r1 r2 data
Set text line spacing *1	ESC A n	27 65 n	1B	41 n

in n/72 inch increment when FUNCTION 12 is OFF;

in n/60 inch increment when FUNCTION 12 is ON (AGM mode); n = 1 to 255

*1 • After text line spacing is set, use the ESC 2 code to enable text line spacing.

116Appendix C Printer Command Summaries