â– Connecting the printer to your computer

This printer is equipped with two interfaces. In addition to a parallel interface, the printer also has a built-in IrDA interface for wireless connection to a host computer equipped with an IrDA interface.

Connecting the parallel interface

A parallel interface port is provided for connection to IBM compatible PC computers.

Follow the procedure below to connect the printer to the host computer with the BIFC-50 printer cable.

To connect this printer to a computer via the parallel interface ports, you must use the Canon Printer Cable BIFC-50 provided with this printer.

1.

2.

Make sure the printer and computer are switched off.

Connect the small end of the BIFC-50 printer cable to the parallel interface connector on the left side of the printer. Carefully match

the shape of the small D-connectors ( ) on the end of the cable with the connector on the printer then push gently to connect the cable to the printer.

22Chapter 2 Setting Up the Printer

Page 23
Image 23
Canon K10158 manual Connecting the printer to your computer, Connecting the parallel interface