Canon K10158 manual Printing job halts before completion

Printing job halts before completion

1. Open the printer driver.

2. Check the port setting.

If you are using Windows 98/Windows 95, go on to the next step.

3.

4.

-or-

If you are using Windows 3.1, go to step 4.

At the startup screen of Windows 98/Windows 95, click the Start button. Click Settings then click Printers.

•Use the right mouse button to click on the BJC-50 icon then click properties.

•Click the Details tab to open the Details control sheet. Check the port assignment in the first box.

•If there is a WPS driver installed, make sure that this WPS driver is not installed for the same port as the BJC-50. If the WPS driver is installed for the same port as the BJC-50 printer driver, disable the WPS driver temporarily by assigning it the FILE port, or delete the WPS driver.

In the Program Manager of Windows 3.1, click Main then click Control Panel.

•If you need to change the port assignment, highlight BJC-50 in the list of Installed Printers and click the Connect button. Select a new port assignment from the list of Ports.

For details, refer to Windows Print Guide or your Windows 98/Windows 95 or Windows 3.1 instructions

7

Chapter 7 Troubleshooting 95