Canon K10158 manual Alternate Graphics Mode AGM codes, Miscellaneous control codes

Function	ASCII	Dec.	Hex.
Print continuously from All Characters Chart
	ESC \ n1 n2 data	27 92 n1 n2 data	1B	5C n1 n2 data
Print single character from All Characters Chart
	ESC ^	27 94	1B	5E
Set/cancel overscore mode	ESC _ n	27 95 n	1B	5F n
n = 0: Cancel overscore mode
n = 1: Set overscore mode
Relative move inline forward	ESC d n1 n2	27 100 n1 n2	1B	64 n1 n2
Set printer off-line	ESC j	27 106	1B	6A

C

Alternate Graphics Mode (AGM) codes

When AGM is set to ON, the following commands are available. When the AGM is not selected, the commands ESC 3, ESC A, and ESC J are used to set different line spacing.

Function	ASCII	Dec.	Hex.
Set graphics line spacing	ESC 3 n	27 51 n	1B	33 n
in n/180 increments; n=1 to 255
Set text line spacing	ESC A n	27 65 n	1B	41 n
in n/60 inch per line; n=1 to 255:
Perform graphics line spacing	ESC J n	27 74 n	1B	4A n
Line spacing amount is n/180;
n = 0 to 255
Select graphics mode	ESC * m n1 n2 data	27 42 m n1 n2 data 1B		2A m n1 n2 data

Miscellaneous control codes

Function	ASCII	Dec.	Hex.
Select Font Global	ESC [ I n1 n2 f1 f2	27 91 73 n1 n2 f1 f2	1B	5B 49 n1 n2 f1 f2
	s1 s2 s3	s1 s2 s3	s1 s2 s3
Set 360 dpi graphics	FS C B m1 m2 n1	28 67 66 m1 m2 n1	1C	43 42 m1 m2 n1
	n2 data	n2 data	n2 data
Set/Perform graphics line spacing	FS C J m n	28 67 74 m n	1C	43 4A m n

m = 0: set n/180 line spacing

m = 4: set n/360 line spacing

Appendix C Printer Command Summaries 119