Printing Does Not Start
Cause | Action |
Ink tank is empty. | See “An Error Message Is Displayed on the LCD” on page 133 to identify the ink |
| error, and then take the appropriate action depending on the error condition. |
Ink tank not installed in proper position. Open the Scanning Unit (Printer Cover) and check the ink lamps.
| If there is still sufficient ink but its ink lamp is flashing red, an ink tank may be | ||||||
| installed in a wrong position. |
|
| ||||
| Confirm that the ink tanks are installed in the appropriate positions. See | ||||||
| “Replacing an Ink Tank” on page 107. |
|
| ||||
Ink tank is not installed securely. | Open the Scanning Unit (Printer Cover) and check the ink lamps. | ||||||
| If the ink lamp is not lit, press the |
|
| mark on the ink tank until it clicks into | |||
|
| ||||||
| place. The ink lamp lights up red | when the ink tank is fully inserted. | |||||
Unnecessary print jobs are left in | Restarting your computer may solve the problem. | ||||||
queue. / Computer problems. | If there are any unnecessary print jobs, follow the procedure below to delete | ||||||
| them. |
|
| ||||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
| (1)Open the printer properties dialog box. |
| |||||
| Refer to “Opening the Printer Properties Dialog Box Directly from the Control | ||||||
| Panel” in “Opening the Printer Properties Dialog Box (Windows)” of the | ||||||
| User’s Guide |
|
| ||||
| (2)Click the Maintenance tab and then View Printer Status. | ||||||
| The printer status monitor is displayed. |
| |||||
| (3)Click Display Print Queue. |
|
| ||||
| (4)Select Cancel All Documents on the Printer menu. | ||||||
| You may not be able to select this depending on the privileges of the | ||||||
| account. |
|
| ||||
| (5)When the confirmation message is displayed, click Yes. | ||||||
| The print jobs are deleted. |
|
| ||||
|
|
|
| ||||
|
|
|
|
| |||
| (1)Click the printer icon in the Dock to display the list of print jobs in progress. | ||||||
| (2)Select the print job to delete and click | . | |||||
| The print jobs are deleted. |
|
| ||||
The machine is not ready. | Check if any lamp on the Operation Panel is lit. | ||||||
| If all the lamps on the Operation Panel are off, press the ON/OFF button to turn | ||||||
| on the machine. While the COPY button is flashing, the machine is initializing. | ||||||
| Wait until the COPY button stops flashing and remains lit. | ||||||
| Note |
|
| ||||
| When printing large data such as a photo or graphics, it may take longer to start | ||||||
| printing. |
|
| ||||
Troubleshooting 145