Appendix
•Always grasp the plug when you unplug the power cord. Pulling on the power cord could damage the cord and cause a fire or electric shock.
Never use an extension cord. To avoid a fire or electric shock, always plug the power cord directly into the power outlet.
Never use a power supply voltage other than that supplied in the country where you purchased the printer. Using incorrect voltage could cause a fire or electric shock. The correct power supply voltage for this printer is AC 120V, 60 Hz.
Cleaning and Maintaining the Printer
Use only a slightly damp cloth to clean the printer. Never use flammable solvents such as alcohol, benzene, or thinner. If a flammable solvent contacts an electrical component inside the printer, a fire or electric shock could result.
Always unplug the printer power cord before you clean the printer. If you mistakenly turn on the printer while cleaning it, you could touch moving components inside the printer and suffer injury.
Never attempt to disassemble or modify the printer. The printer contains high voltage components which could cause a fire or serious electric shock.
Working Around the Printer
Never use flammable sprays near the printer. Gases in the spray could cause a fire or electric shock if they come in contact with electrical components inside the printer.
Never insert your fingers or hands inside the printer while it is printing. The printer contains moving parts which could cause injury.
Never place anything on top of the printer, especially metal objects (such as paper clips, staples), or containers with flammable solvents (such as alcohol, benzene or thinners). Objects falling into the printer could cause a fire or electric shock.
If any foreign object, especially a piece of metal or liquid, falls into the printer, immediately press the POWER button to turn off the printer, unplug the power cord, then call the Customer Care Center. Continuing to use the printer after a foreign object has fallen into it could cause a fire or electric shock.
Printhead and Ink Tanks
For safety, always store printhead and ink tanks out of the reach of small children. If a child accidentally licks or ingests any ink, consult a physician immediately.
Never subject a printhead or ink tank to shocks or excessive vibration. Shaking could cause ink to leak and stain clothing.
Never touch the printhead or electrical contacts on a printhead immediately after removing it from the printer. These metal parts become very hot during printing and could cause minor burns.
Turning the Printer Off
To avoid printer malfunction always use the POWER button to turn the printer on and off. Never remove the power cord from the power outlet until you have turned off the printer by pressing the POWER button. After the POWER/ ERROR lamp goes out, you can unplug the power cord from the power outlet.
Using the Printer Near Appliances and Fluorescent Lamps
Allow at least 6 inches clearance between the printer and another appliance or a fluorescent lamp. Electrical noise generated by a fluorescent lamp placed too close to the printer could cause the printer to malfunction.
51
