Casio FX-9860G Press, Use the, Use the, 6.Press !j(PASTE), See “To specify the copy range” (page, uTo use copy and paste to draw a graph

10-3-17

Inputting and Editing eActivity File Data

uTo use copy and paste to draw a graph

1.Perform steps 1 through 7 under “To create a Graph strip” (page 10-3-13) to create a Graph strip with the title “Graph draw”.

•After completing step 7, check to make sure the Graph strip is highlighted on the eActivity workspace screen. If it isn’t, use the f and c cursor keys to move the highlighting to the Graph strip.

2.Press 3(INS)1(TEXT) to input a text line.3.Enter the following expression into the text line: Y = X2 – 1.

4.Use the f and c cursor keys to move the cursor to the expression you just input (Y = X2 – 1), and copy it to the clipboard.

•See “To specify the copy range” (page 1-3-5) for details about how to copy text to the clipboard.

5.Use the f and c cursor keys to move the highlighting to the Graph strip, and then press w.

•This will graph the function currently stored in “Graph draw ” strip memory.6.Press !j(PASTE).•This will graph the function that is on the clipboard (Y = X2 – 1).

7.To return to the eActivity workspace screen, press !a(').

8.Press w again to call up the graph screen.

•This will re-graph the function currently stored in “Graph draw” strip memory.

#Though the above example uses an expression that was copied from the eActivity workspace screen, you can also copy an

expression from another application and then paste it into eActivity.

20070201