Casio FX-9860G 1-9Using Screen Capture, uTo capture a screen image, uTo recall a screen image from capture memory

1-9-1

Using Screen Capture

1-9 Using Screen Capture

Any time while operating the calculator, you can capture an image of the current screen and save it in capture memory.

uTo capture a screen image

1. Operate the calculator and display the screen you want to capture.

2.Press !h(CAPTURE).

•This displays a memory area selection dialog box.

3.Input a value from 1 to 20 and then press w.

•This will capture the screen image and save it in capture memory area named “Capt n” (n = the value you input).

•You cannot capture the screen image of a message indicating that an operation or data communication is in progress.

•A memory error will occur if there is not enough room in main memory to store the screen capture.

uTo recall a screen image from capture memory

1.In the RUN • MAT mode (Linear input mode), press K6(g)6(g)5(CAPT) 1(RCL).

2.Enter a capture memory number in the range of 1 to 20, and then press w.

•You can also use the RclCapt command in a program to recall a screen image from capture memory.

20070201