Casio fx-CG20 uGenerating a Table, uTo generate a table using a list, uTo change the number table character color from the table relation list screen, Example

uTo generate a table using a list

1. While the table relation list is on the screen, display the Setup screen.

2. Highlight “Variable” and then press 2(LIST) to display the pop-up window.

3. Select the list whose values you want to assign for the x-variable.

•To select List 6, for example, press gw. This causes the setting of the Variable item of the Setup screen to change to List 6.

4.After specifying the list you want to use, press J to return to the previous screen.

uTo change the number table character color from the table relation list screen

The procedure for changing the number table character color from the table relation list screen is identical to the procedure for changing the graph line color from the graph relation list screen.

For details, see “To change graph properties from the graph relation list screen” (page 5-15).

uGenerating a Table

Example	To generate a table of values for the functions stored in memory areas
	Y1 and Y3 of the table relation list

Use f and c to move the highlighting to the function you want to select for table generation and press 1(SELECT) to select it.

The “=” sign of selected functions is highlighted on the screen. To deselect a function, move the cursor to it and press 1(SELECT) again.

Press 6(TABLE) to generate a number table using the functions you selected. The value of variable x changes according to the range or the contents

of the list you specified.

The example screen shown here shows the results based on the contents of List 6 (–3, –2, –1, 0, 1, 2, 3).

Each cell can contain up to six digits, including negative sign.

5-31