Casio QV-2300UX manual 100, Using the Slide Show Feature

PLAYBACK

Using the Slide Show Feature

Slide Show automatically plays back images in sequence at a fixed interval.

1.Enter the PLAY mode.

2.Press MENU.

3.Select “SLIDE SHOW”, and then press the shutter release button.

•This starts the slide show.

•Pressing MENU at this point displays a screen for set- ting the interval between image changes within the range of three to 30 seconds.

4.To stop Slide Show, press any button besides the shutter release button.

IMPORTANT!

•Auto Power Off (page E-36) is disabled whenever Slide Show is being used. This means you should not leave Slide Show running when using batteries to power the camera. Doing so can rundown batteries. Be sure to stop Slide Show and turn off the camera after you are finished.

•Note that all buttons are disabled while an image change is in progress. Wait until an image is stopped on the monitor screen before performing a button op- eration, or hold down the button until the image stops.

•Images copied from another digital camera or a com- puter may take longer time to appear than the Slide Show interval time you select.

E-100