BASIC IMAGE RECORDING
•You can find out the status of the Auto Focus operation by checking the color of the focus frame and the status of the operation lamp.
SHIFT 
MF
INFO
Operation lamp
• | Recorded images are temporarily stored in a buffer, |
| from which they are stored to the memory card in- |
| stalled in the camera. You can continue to store im- |
| ages as long as there is space available in the buffer. |
• | The number of images you can store in the camera |
| depends on the storage medium and the image quality |
| setting (page |
If you see this | It means this |
Green focus frame and green | The image is in focus. |
operation lamp |
|
Red focus frame and red | The image is not in focus. |
operation lamp |
|
• Take care that you do not block the lens or the sensors with your fingers as you hold the camera.
6.After confirming that the image is in focus,
press the shutter release button all the way down to record the image.
• | To avoid hand movement, press the shutter release |
| button gently. |
• | Use of a tripod is recommended for slow shutter |
| speeds and telephoto shots to avoid blurring of the |
| image due to camera movement. |
■ Camera Shake Indicator | |
The 
(camera shake indicator) appears on the monitor screen when the zoom slider is set to T (telephoto) or when a slow shutter speed is being used.
•If the camera shake indicator 
appears, use a tripod and the wired remote controller to avoid camera movement.
