CONNECTING TO EXTERNAL EQUIPMENT
1.Use the video cable to connect the camera to the television as shown in the illustration.
2.Perform the required operation on the TV to set it up for video input.
IMPORTANT!
•When you have PAL selected as the video signal out- put mode, the monitor screen is turned off when you connect the cable to the VIDEO OUT terminal.
•See the documentation that comes with your televi- sion for information about how to do this.
3.Perform normal playback and recording opera- tions on the camera.
IMPORTANT!
•Icons and other indicators that normally appear on the camera’s monitor screen will also appear on the screen of the connected TV.
Selecting the Video Output Signal Mode
Your camera supports both NTSC (used in U.S., Japan, and other countries) and PAL (used in Europe and other areas) video output signal systems. The video system you should use depends on the country of origin of the equipment you are connecting to the camera’s VIDEO OUT terminal.
1.Enter the REC mode or PLAY mode.
2.Press MENU.
3.Select “VIDEO OUT” using one of the following two key operations, and then press the shutter release button.
If you are here | Select this on the menu screen | ||||||
|
|
|
|
|
|
|
|
REC mode | “FUNCTION” |
| “SET UP” |
| “VIDEO OUT” | ||
|
| ||||||
|
|
|
|
|
|
|
|
PLAY mode | “SET UP” |
|
| “VIDEO OUT” | |||
| |||||||
|
|
|
|
|
|
|
|
4.Use [+] and
