BASIC IMAGE RECORDING
Flash Status Indicators
You can check the current flash unit status by checking the monitor screen indicator and operation lamp while the shut- ter release button is pressed about half way down.
Adjusting the Flash Intensity
Use the following procedure to adjust the intensity of the flash when it fires.
SHIFT | MF |
INFO |
|
Operation lamp
■ Operation lamp
If the operation lamp is doing this | It means this | |
Flashing amber | Flash unit is charging | |
Flashing red | Flash unit cannot be | |
charged for some reason | ||
| ||
|
|
1.Enter the REC mode.
2.Press MENU.
3.Select “FUNCTION” 
“Flash Intensity”, and then press the shutter release button.
4.Select the setting you want, and then press the shutter release button to apply it.
To do this | Select this setting |
Fire the flash with strong intensity | Strong |
|
|
Fire the flash with normal intensity | Normal |
|
|
Fire the flash with weak intensity | Weak |
|
|
■Monitor screen
When you have Auto Flash or
as the flash mode, the indicator 
appears on the display when you press the shutter release button about half way down to indicate that available light is insufficient and the flash will be fired.
