BASIC IMAGE RECORDING

Using the Infinity Mode

The Infinity Mode sets the focus near infinity. It is a good choice for scenery and other far-off subjects. Focus adjust- ment starts automatically whenever you press the shutter release button about half way down.

1.Press to cycle through the focus

mode settings until the indicator appears on the display. This indicates the Infinity Mode.

2.Compose the image and record it.

See “Using the Auto Focus Mode” on page E-55 for information about how the camera focuses an image automatically.

You can check the current status by looking at the op- eration lamp and focus frame. See “Using the Auto Focus Mode” on page E-55 for more information.

Using the Manual Focus Mode

With Manual Focus, you make the required focus settings by hand. The following shows the relationship between optical zoom factor and the focusing distance for the Manual Focus Mode.

 

Optical Zoom Factor

Focusing Distance

 

 

 

QV-2300UX

1X

1cm to

 

 

3X

50cm to

 

 

 

 

QV-2800UX

1X

1cm to

 

 

8X

1m to

 

 

 

 

1.Press to cycle through the focus

mode settings until the indicator appears flashing on the display. This indicates the Manual Focus Mode.

2.While the indicator is flashing, use [+] and [–] to focus the image.

If you do not perform any focus operation for about

two seconds, the indicator stops flashing.

You can press while the indicator is on the monitor screen to change to another focus mode, if you want.

E-57

Page 57
Image 57
Casio QV-2300UX manual Using the Infinity Mode, Using the Manual Focus Mode