Chapter 3 Installing the Router
If You Need More Information
Locked Blocks in Flash Memory Cards
A locked block in Flash memory cards occurs when power is lost or a Flash memory card is removed from its PCMCIA slot on the RP during a write or erase operation.
When a block of Flash memory is locked, it cannot be written to or erased. Any attempt to do so will consistently fail at the block location. The only way to recover from locked blocks in a Flash memory card is to reformat the Flash memory card using the format command.
Caution Formatting a Flash memory card erases all existing data on the card.
If You Need More Information
If your router is not fully functional, you may need to perform additional configuration tasks. For more detailed information about configuring the router and its interfaces, see the publications listed in the following section.
The Cisco IOS software running your router contains extensive features and functionality. For information on Cisco IOS software and general installation and maintenance information for your router, use the following resources.
Cisco IOS Software Configuration Information and Support
The modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set correspond to the Cisco IOS software release installed on your Cisco hardware. You can also see the Cisco IOS software release notes for the version of Cisco IOS software you are using on your router.
You can access Cisco IOS software documentation and hardware installation and maintenance documentation on the World Wide Web at http://www.cisco.com,
If you are reading Cisco documentation on the World Wide Web, you can submit comments electronically. Click Feedback on the toolbar, and then select Documentation. After you complete the form, click Submit to send it to Cisco.
| Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide |
|
