Cisco Systems 5000 manual Removing an I/O Module

Chapter 4 Replacing Components

Replacing an I/O Module for a Cisco Nexus 5548 Switch

Se n d d o c u m e n t a t i o n c o m m e n t s t o n ex u s 5 k d o c s @ c i s c o . c o m .

Figure 4-1 Product ID on a Layer 3 I/O Module

1

239213

1

Layer 3 modules have an N55-D160L3 or

N55-D160L3-V2 product ID. Layer 2 modules do not list a PID.

This section includes the following topics:

•Removing an I/O Module, page 4-2

•Installing an I/O Module, page 4-4

Removing an I/O Module

To remove an I/O module from a Cisco Nexus 5548 chassis, follow these steps:

Step 1 Prepare an antistatic surface for placing removed components.

Step 2 On the right fan module, loosen its captive screw so that it is no longer connected to the chassis or I/O module (see Callout 1 in Figure 4-2).

Cisco Nexus 5500 Platform and Cisco Nexus 5000 Platform Hardware Installation Guide

4-2 OL-15902-01