Cisco Systems 5000 manual Loosen captive screws until they are no longer attached to the chassis

Chapter 4 Replacing Components

Replacing an I/O Module for a Cisco Nexus 5548 Switch

Se n d d o c u m e n t a t i o n c o m m e n t s t o n ex u s 5 k d o c s @ c i s c o . c o m .

Figure 4-2 Removing a Fan Tray from the I/O Module in the Chassis

239226

1

2

1

Loosen the captive screw on the right most fan tray so that the screw is free of the I/O module.

2

Pull the fan tray out of the I/O module and set on an antistatic surface.

Step 3 With a hand on the fan module handle, pull the fan module out of the chassis (see Callout 2 in Figure 4-2) and place it on an antistatic surface.

Step 4 Loosen the two captive screws on the I/O module so that they are no longer in contact with the chassis (see Callout 1 in Figure 4-3).

Figure 4-3 Detaching the I/O Module from the Chassis

239227

1

1 2

1

Loosen captive screws until they are no longer attached to the chassis.

2

Pull the I/O module part way out of the chassis.

Step 5 Holding the handle for the left fan module, pull the I/O module (which houses the fan module) part way out of the chassis (see callout 2 in Figure 4-3).

Step 6 Place your other hand under the I/O module to support its weight, and fully remove the module from the chassis (see Callout 1 in Figure 4-4).

Cisco Nexus 5500 Platform and Cisco Nexus 5000 Platform Hardware Installation Guide

OL-15902-01 4-3