Cisco Systems 5000 manual Expansion Modules, N5K-M1404 Generic Expansion Module, page, 1-42

Chapter 1 Overview

Cisco Nexus 5000 Platform Switches

Se n d d o c u m e n t a t i o n c o m m e n t s t o n ex u s 5 k d o c s @ c i s c o . c o m .

1	System status LED	4	20 fixed 10-Gigabit Ethernet ports
2	Two cross-connect ports on the left (top and	5	Expansion modules
	bottom) and two network management ports
	on the right (top and bottom)
3	Console port	6	AC power connectors

The cross-connect and network-management ports are in a 2 x 2 stacked set of RJ-45 jacks. Figure 1-44shows a close-up view of the these ports.

Figure 1-44 Cross-Connect and Network-Management Ports

1

2

186385

1

Internal cross connect ports

2

Network management ports

For information on the Ethernet LEDs, see Table D-3 on page D-4.

Expansion Modules

Expansion modules allow Cisco Nexus 5000 Platform switches to be configured as cost-effective,

10-Gigabit Ethernet switches and as I/O consolidation platforms with native Fibre Channel connectivity. The Cisco Nexus 5010 switch has one slot for an optional uplink Generic Expansion Module (GEM). The following modules can be inserted in this slot: N5K-M1404, N5K-M1600, N5K-M1008 and N5K-M1060.

•N5K-M1404 provides 4 10G SFP+, and 4 Fibre Channel 4-, 2-, or 1-Gbps SFP-based uplink connections. The 10-Gigabit Ethernet ports are encryption capable.

•M5K-M1600 provides 6 10G SFP+ based uplink connections.

•N5K-M1008 provides 8 4-, 2-, or 1-Gbps Fibre Channel, SFP based uplink connection.

•N5K-M1060 provides 6 8-, 4-, 2-, or 1-Gbps line rate Fibre Channel, SFP+ based uplink connections.

The chassis supports hot swapping of the expansion modules.

This section includes the following topics:

•N5K-M1404 Generic Expansion Module, page 1-43

	Cisco Nexus 5000 Series Hardware Installation Guide
1-42	OL-15902-01