Cisco Systems 5000 manual Fan Modules, FAIL top and OK bottom LEDs, Release latch, Handle, 1-49

Chapter 1 Overview

Cisco Nexus 5000 Platform Switches

Se n d d o c u m e n t a t i o n c o m m e n t s t o n ex u s 5 k d o c s @ c i s c o . c o m .

Figure 1-55 Power Supply for the Cisco Nexus 5010 Switch

1

2

189955

3

1	FAIL (top) and OK (bottom) LEDs	3	Release latch
2	Handle

For information on the LEDs see Table D-1 on page D-2. To see what combinations of these LEDs indicate, see Table D-2 on page D-3.

If you have one power supply installed in the chassis, but the other power supply slot is empty, you should use a blank panel to cover the empty slot. Figure 1-56shows a blank power supply panel.

Figure 1-56 Blank Power Supply Panel

186854

Fan Modules

The Cisco Nexus 5010 switch has slots for two fans modules. Each fan module houses six fans and each uses front to back airflow. If you insert 2 fan modules (with 6 fans in each module), your switch will have a total of 12 fans. Figure 1-26shows the fan module.

	Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01		1-49