Cisco Systems 7970 Series manual Using cBarge

Using cBarge

You can create a conference by using cBarge to add yourself to a call on a shared line.

If you want to...	Then...
Create a conference by	Press the line button for the shared line.
barging a call on a shared line	In some cases, you must highlight the call and press cBarge to
	complete the action.
	See Using Barge to Add Yourself to a Shared-Line Call, page 47 for
	more information.
See a list of participants or	See Viewing or Removing Conference Participants, page 41.
remove participants

Using Meet-Me

Meet-Me conferencing allows you to start or join a conference by calling the conference number.

If you want to...	...Then
Start a Meet-Me conference	1.	Obtain a Meet-Me phone number from your system administrator.
	2.	Distribute the number to participants.
	3.	When you are ready to start the meeting, go off-hook to get a dial
		tone, then press MeetMe.
	4.	Dial the Meet-Me conference number.
		Participants can now join the conference by dialing in.
	Note Participants hear a busy tone if they call the conference before the
		initiator has joined. In this case, participants must call back.
Join a Meet-Me conference	Dial the Meet-Me conference number (provided by the conference
	initiator).
	Note You will hear a busy tone if you call the conference before the
		initiator has joined. In this case, try your call again.
End a Meet-Me conference	All participants must hang up.
	The conference does not automatically end when the conference
	initiator disconnects.

Tip

If you call a secure Meet-Me conference number from a non-secure phone, your phone displays the message, “Device Not Authorized.” For more information, see Making and Receiving Secure Calls, page 51.

-40 OL-16993-01