Cisco Systems AS5400XM quick start SPE Firmware, Feature Description

Note For detailed information about the universal port and dial-only feature card CLI commands, see the Monitoring Voice and Fax Services on the Cisco AS5350 and Cisco AS5400 Universal Gateway document, which is available online at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080080e60.html

SPE Firmware

SPE firmware is automatically downloaded to universal port or dial-only feature cards from the Cisco AS5350XM or

Cisco AS5400XM universal gateway when you boot the system for the first time or when you insert a universal port or dial-only feature card while the system is operating. When you insert feature cards while the system is operating, the Cisco IOS image recognizes the cards and downloads the required firmware to the cards.

The SPE firmware image is bundled with the universal gateway Cisco IOS image. The SPE firmware image uses an autodetect mechanism that enables the universal port and dial-only feature cards to service multiple call types. An SPE detects the call type and automatically configures itself for that operation. The firmware is upgradable independent of Cisco IOS upgrades, and different firmware versions can be configured to run on SPEs in the same feature card.

The universal port and dial-only feature cards support the modem standards and features listed in Table 6.

Table 6 Modem Standards and Supported Features

Feature	Description
Carrier protocols	ITU V.23 at 75/1200 bps
	Telcordia Technologies 103 at 300 bps
	ITU V.21 at 300 bps
	ITU V.22 at 1200 bps
	Telcordia 212A at 1200 bps
	ITU V.22bis at 2400 bps
	ITU V.32 up to 9600 bps
	ITU V.32bis up to 14,400 bps
	V.32 turbo up to 19,200 bps
	V.FC up to 28,800 bps
	V.34 up to 28,800 bps
	V.34+ up to 33.6 bps
	TIA/ITU V.90
	K56flex
Error-correcting link-access protocols	V.42 LAPM, MNP 2-4
Compression protocols	V.42bis (includes MNP 5)
Command interface	Superset of the AT command set
In-band signaling/tone generation	Dual-tone multifrequency (DTMF) generation
and detection	DTMF detection
	Multifrequency (MF) generation
	MF detection
Other	Out-of-band access for management
	PPP and SLIP framing

52