Cisco Systems AS5400XM quick start Configuring the Voice Feature Card

SPE settings:
==============
Country code configuration: default T1 (u Law)
Polling interval: 8 secs.
History log events: 50(per port)
Port legends:
============
Port state: (s)shutdown (t)test (r)recovery (d)download
	(b)busiedout (p)busyout pending, (B)bad (a)active call
Call type: (m)modem (d)digital (f)fax-relay (v)voice							(_)not in use
System resources summary:
======================
Total ports: 108, in use ports: 0, disabled ports: 0, free ports: 108
Total active calls: modem			0,	voice	0,	digital	0,	fax-relay	0
		SPE		SPE	SPE	SPE	Port	Call
SPE#	Port #	State		Busyout Shut Crash			State	Type
4/00	0000-0005	ACTIVE		0	0	0	______	______
4/01	0006-0011	ACTIVE		0	0	0	______	______
4/02	0012-0017	ACTIVE		0	0	0	______	______
4/03	0018-0023	ACTIVE		0	0	0	______	______
4/04	0024-0029	ACTIVE		0	0	0	______	______
.

.

.

•To display a summary for a single line, enter the show line number command:

Gateway# show line 1

Tty Typ	Tx/Rx	A Modem Roty AccO AccI					Uses		Noise	Overruns	Int
1 AUX	9600/9600	-	-	-	-	-		0	0	0/0	-
Ready
Line 1, Location: "", Type: ""
Length: 24 lines, Width: 80 columns
Baud rate (TX/RX) is 9600/9600, no parity, 2 stopbits, 8 databits
Status: Ready
Capabilities: none
Modem state: Ready
Group codes:	0
Modem hardware state: noCTS noDSR				DTR RTS
TTY NUMBER 1
Parity Error = 0 Framing Error = 0 Receive Error = 0 Overrun = 0
Outcount = 0 totalout = 39 incount				= 0 totalin = 0
Special Chars: Escape		Hold	Stop	Start		Disconnect		Activation
	^^x	none	-	-		none
Timeouts:	Idle EXEC		Idle Session			Modem Answer			Session	Dispatch
	00:10:00		never						none	not set
			Idle Session Disconnect Warning

never

Login-sequence User Response

Tip If you are having trouble, make sure that you turned on the protocols for connecting to the lines (by using the transport input all command) and configured the lines for incoming and outgoing calls (by using the modem inout command).

Configuring the Voice Feature Card

A voice feature card with one to six PVDM2-64 modules supports different port densities, depending on codec complexity:

•Low complexity: up to 384 G.711 ports

•Medium complexity: up to 192 G.726, G.729a, G.729ab, Fax Relay ports

54