Figure 15 Installing a Feature Card in a Cisco AS5400XM Universal Gateway
| 37165 |
Step 3 | Align the captive screws with their holes, and seat the card completely. |
Step 4 | Tighten the screws to secure the feature card to the chassis. (See Figure 16 and Figure 17.) |
Figure 16 Tighten the Captive Screws on the Cisco AS5350XM Universal Gateway
Chassis
0 | 1 |
Rx Tx
2 PRI 
ACT 
36817
Captive | DFC | Captive | |
screw | |||
| |||
screw |
| Carrier | |
|
| card |
Figure 17 Tighten the Captive Screws on the Cisco AS5400XM Universal Gateway
Captive
screwCaptive screw
37170
Step 5 Check the card LEDs to verify that the card is working properly. The following table summarizes the LED functions for the feature cards.
12
