Cisco Systems IP phone 7960 manual Downloading Files to Your Tftp Server, File Description

Chapter 2 Getting Started with Your Cisco SIP IP Phone

Installing the Cisco SIP IP Phone

Downloading Files to Your TFTP Server

Before installing the Cisco SIP IP phones, copy the following files from CCO to the root directory of your TFTP server.

		File	Description
		OS79XX.TXT	(Required) Enables the phone to automatically
			determine and initialize for the VoIP environment in
			which it is being installed.
			After downloading this file, you will need to use an
			ASCII editor to open it and specify the file name
			(without the file extension) of the image version that
			you plan to run on your phones.
		SIPDefaultGeneric.cnf	(Optional) File in which to configure SIP parameters
			intended for all phones.
			For more information on using the SIPDefault.cnf
			file, see the “Creating the Default SIP Configuration
			File” section on page 2-7.
		SIPConfigGeneric.cnf	(Required) File which can be used as a template to
			configure SIP parameters specific to a phone. When
			customized for a phone, this file must be renamed to
			the MAC address of the phone.
		RINGLIST.DAT	(Optional) Lists audio files that are the custom ring
			type options for the phones. The audio files listed in
			the RINGLIST.DAT file must also be in the root
			directory of the TFTP server.
			For more information on custom ring types, see the
			“Customizing the Cisco SIP IP Phone Ring Types”
			section on page 2-24.
		P0S3xxyy.bin	(Required) The Cisco SIP IP phone firmware image.
		(where xx is the version
		number and yy is the
		subversion number)
		dialplan.xml	(Optional) North American example dial plan.
		syncinfo.xml	(Optional) Controls the image version and associated
			sync value to be used for remote reboots.
	Cisco SIP IP Phone 7960 Administrator Guide
2-4			78-10497-02