Chapter 3 Managing Cisco SIP IP Phones
Accessing Status Information
Step 4 Highlight the parameter for which you wish to erase the setting.
Step 5 Press the Edit soft key.
Step 6 Press the << soft key to delete the current value.
Step 7 Press the Validate soft key to save your change and exit the Edit panel.
Step 8 If modifying a line parameter, press the Back soft key to exit the Line Configuration panel.
Step 9 Press the Save soft key. The phone programs the new information into Flash memory and resets.
Accessing Status Information
There are several types of status information that you can access via the settings key. The information that you can obtain via the settings key can aid in system management.
To access status information, select settings and then select Status from the Settings menu. From the Status which the following three options are available:
•Status
•Network
•Firmware
In addition to the status messages available via the Setting Status menu, you can also obtain status messages for a current call.
| Cisco SIP IP Phone 7960 Administrator Guide |
|
