Chapter 3 Managing Cisco SIP IP Phones
Accessing Status Information
•Phone State Message—TCP messages indicating the state of the phone. Possible messages are:
–Phone Initialized—TCP connection has not gone down since the phone was powered on.
–Phone Closed TCP—TCP connection was closed by the phone.
–TCP Timeout—TCP connection was closed because of a retry timeout.
–Error Code—Error messages indicating unusual reasons the TCP connection was closed.
•Elapsed Time—Length of time (in days, hours, minutes, and seconds) since the last power cycle.
•Port 0 Full, 100—Indicates that the network is in a linked state and has auto-negotiated a full-duplex 100Mbps connection.
•Port 0 Half, 100—Indicates that the network is in a linked state and has auto-negotiated a half-duplex 100Mbps connection.
•Port 0 Full, 10—Indicates that the network is in a linked state and has auto-negotiated a full-duplex 10Mbps connection.
•Port 0 Half, 10—Indicates that the network is in a linked state and has auto-negotiated a half-duplex 10Mbps connection.
•Port 1 Full, 100—Indicates that the network is in a linked state and has auto-negotiated a full-duplex 100Mbps connection.
•Port 1 Half, 100—Indicates that the network is in a linked state and has auto-negotiated a half-duplex 100Mbps connection.
•Port 1 Full, 10—Indicates that the network is in a linked state and has auto-negotiated a full-duplex 10Mbps connection.
•Port 1 Half, 10—Indicates that the network is in a linked state and has auto-negotiated a half-duplex 10Mbps connection.
Step 6 To exit the Network Statistics panel, press the Exit soft key.
Note To reset the values displayed on Network Statistics panel, power off and power on the phone.
| Cisco SIP IP Phone 7960 Administrator Guide |
3-32 | 78-10497-02 |
