Appendix B SIP Call Flows

Call Flow Scenarios for Successful Calls

Gateway to-Cisco SIP IP Phone—Successful Call Setup and Call Transfer

Figure B-3 illustrates a successful gateway-to-Cisco SIP IP phone PC call setup and call transfer without consultation. In this scenario, there are three end users: User A, User B, and User C. User A is located at PBX A. PBX A is connected to Gateway 1 (SIP Gateway) via a T1/E1. User B is located at a Cisco SIP IP phone and is directly connected to the IP network. User C is located at PBX B. PBX B is connected to Gateway 2 (SIP Gateway) via a T1/E1. Gateway 1, Gateway 2, and the Cisco SIP IP phone are connected to one another over an IP network.

The call flow is as follows:

1.User A calls User B.

2.User B answers the call.

3.User B transfers User A’s call to User C and then hangs up.

4.User C answers the call.

 

 

Cisco SIP IP Phone 7960 Administrator Guide

 

 

 

 

 

 

78-10497-02

 

 

B-11

 

 

 

Page 119
Image 119
Cisco Systems IP phone 7960 manual 78-10497-02