Cisco Systems IP phone 7960 manual Example 2-1 Example of a PBX North American Dial Plan

Chapter 2 Getting Started with Your Cisco SIP IP Phone

Creating Dial Plans

•User=” type” is the either IP or Phone. Enter User=phone or User=IP to have the tag automatically added to the dialed number.

•Rewrite=” altstrng” is the alternate string to be dialed instead of what the user enters.

Step 4 If desired, specify <!--comment--> at the end of each string where comment defines the type of plan (for example, Long Distance or Corporate Dial Plan).

Step 5 When completed, specify </DIALTEMPLATE> to indicate the end the dial plan template.

Step 6 Give the file a unique name specific to the dial plan it defines and save the file with an .xml extension to you TFTP server.

Step 7 If the dial plan applies to a specific phone, add the path to the dial plan (without specifying the file type of .xml) via the dial_template parameter in the phone specific configuration file. If the dial plan applies to a system of phones, add the path to the dial plan via the dial_template parameter in the default configuration file. For more information on defining the dial_template parameter, see the “Modifying the Phone’s SIP Settings” section on page 3-5.

The following is an example of a North American dial plan:

Example 2-1 Example of a PBX North American Dial Plan

<DIALTEMPLATE>
<TEMPLATE MATCH="0" Timeout="1" User="Phone"/> <!--					Local operator--		>
<TEMPLATE MATCH="9,011*" Timeout="6" User="Phone"/> <!						-- International calls--			>
<TEMPLATE MATCH="9,0" Timeout="1" User="Phone"/> <!					--	PSTN Operator--	>
<TEMPLATE MATCH="9,11" Timeout="0" User="Phone" Rewrite="9911"/> <!--							Emergency-->
<TEMPLATE MATCH="w!" Timeout="1" User="PHONE" Rewrite="9911"/> <!--							911 when entered in
Alpha mode --		>
<TEMPLATE MATCH="9,.11" Timeout="0" User="Phone"/> <!--						Service numbers --		>
<TEMPLATE MATCH="9,101			...............	" Timeout="0" User="Phone"/> <!-- Long Distance
Service	-->
<TEMPLATE MATCH="9,10				" Timeout="0" User="Phone"/> <!-- Long Distance
Service	-->
<TEMPLATE MATCH="9,10*" Timeout="6" User="Phone"/> <!--						Long Distance Service--			>
<TEMPLATE MATCH="9,1			" Timeout="0" User="Phone"/> <!-- Long Distance -->
<TEMPLATE MATCH="9,......." Timeout="0" User="Phone"/> <!-- Local numbers								-->
<TEMPLATE MATCH="*" Timeout="15"/> <!--				Anything else	-->
</DIALTEMPLATE>
	Cisco SIP IP Phone 7960 Administrator Guide
2-26									78-10497-02