Cisco Systems MDS 9100 Series - page 102

D-2

Cisco MDS 9100 Series Hardware Installation Guide

OL-16187-01

AppendixD Site Planning and Maintenance Records

Site Preparation Checklist

TableD-1 Site Planning Checklist

Task No. Planning Activity Verified By Time Date

1 Space evaluation:

•Space and layout

•Floor covering

•Impact and vibration

•Lighting

•Maintenance access

2 Environmental evaluation:

•Ambient temperature

•Humidity

•Altitude

•Atmospheric contamination

•Air flow

3 Power evaluation:

•Input power type

•Power receptacles1

•Receptacle proximity to the equipment

•Dedicated circuit for power supply

•Dedicated (separate) circuits for redundant

power supplies

•UPS2 for power failures

1. Verify that the power supply installed in the chassis has a dedicated AC source circuit.

2. UPS = uninterruptible power supply.

4 Grounding evaluation:

•Circuit breaker size

•CO ground (AC- powered systems)

5 Cable and interface equipment evaluation:

•Cable type

•Connector type

•Cable distance limitations

•Interface equipment (transceivers)

6 Electromagnetic interference (EMI) evaluation:

•Distance limitations for signaling

•Site wiring

•RFI3 levels

3. RFI = radio frequency interference.

Contents

Main Page CONTENTS Page Page Page New and Changed Information Page Preface Audience Organization Document Conventions xi Related Documentation Release Notes Compatibility Information Regulatory Compliance and Safety Information Hardware Installation Cisco Fabric Manager Command-Line Interface Intelligent Storage Networking Services Configuration Guides Troubleshooting and Reference Installation and Configuration Note Page Product Overview Cisco MDS 9100 Series Multilayer Fabric Switches Cisco MDS 9134 Switch Cisco MDS 9124 Switch Cisco MDS 9140 Switch Cisco MDS 9120 Switch Cisco MDS Fibre Channel Bladeswitch for IBM BladeCenter Power Supplies Fan Modules Cisco MDS 9100 Series Ports Ports on the Cisco MDS 9134 Switch Page Ports on the Cisco MDS 9124 Switch Ports on the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch Switch LEDs Page Page Supported SFP Transceivers Fibre Channel SFP Transceivers Combination Fibre Channel/Gigabit Ethernet SFP Transceivers CWDM Combination Fibre Channel/Gigabit Ethernet SFP Transceivers Installing the Cisco MDS 9100 Series Preinstallation Installation Options Installation Guidelines Required Equipment Unpacking and Inspecting the Switch Installing the Switch in a Cabinet or Rack Front-Facing Installation Page Page Page Page Installing the Switch in a Cabinet with Insufficient Front Clearance Page Installing Front Rack-Mount Brackets for Cabinets with 26 Inches or Greater of Rail Spacings Installing Front Rack-Mount Brackets for Cabinets with Less Than 26 Inches of Rail Spacings Installing Cisco MDS 9100 Series Switch Rear-Facing into Cabinet Page Installing a Cisco MDS 9134 Switch or a Cisco MDS 9124 Switch Rear-Facing into Cabinet Page Page Page Installing Cisco MDS 9134 48-Port and 64-Port Stackable Bundles Page Grounding the Switch Starting Up the Switch Page Removing and Installing Components 2-27 Page Removing and Installing Power Supplies Removing Power Supplies Installing Power Supplies Removing and Installing Fan Modules Page Installing a Fan Module Verifying the Fan Module Page Connecting the Cisco MDS 9100 Series Preparing for Network Connections Connecting the Console Port Connecting the Console Port to a PC Connecting a Modem to a Console Port Connecting the 10/100 Ethernet Management Port Connecting to a Fibre Channel Port Removing and Installing SFP Transceivers Installing an SFP Transceiver Removing an SFP Transceiver Removing and Installing Cables into SFP Transceivers Installing a Cable into an SFP Transceiver Removing a Cable from an SFP Transceiver Maintaining SFP Transceivers and Fiber-Optic Cables Page A Cabinet and Rack Installation Cabinet and Rack Requirements General Requirements for Cabinets and Racks Requirements Specific to Perforated Cabinets Reference Perforated Cabinet Requirements Specific to Solid-Walled Cabinets Requirements Specific to Standard Open Racks Requirements Specific to Telco Racks Cisco MDS 9000 Family Telco and EIA Shelf Bracket Rack-Mounting Guidelines Before Installing the Shelf Brackets Required Equipment Installing the Shelf Bracket Kit into a Two-Post Telco Rack Page Installing the Shelf Bracket Kit into a Four-Post EIA Rack Installing the Switch on the Shelf Brackets Removing the Shelf Bracket Kit (Optional) Page B Technical Specifications Switch Specifications Power Specifications General Power Supply Specifications Power Supply Requirements and Heat Dissipation Specifications Connection Guidelines for AC-Powered Systems SFP Transceiver Specifications Cisco Fibre Channel SFP Transceivers General Specifications for Cisco Fibre Channel SFP Transceivers Environmental and Electrical Specifications for Cisco Fibre Channel SFP Transceivers Cisco Gigabit Ethernet/Fibre Channel Transceivers General Specifications for Cisco GE/FC SFP Transceivers Environmental and Electrical Specifications for Cisco GE/FC SFP Transceivers Cisco CWDM SFP Transceivers General Specifications for Cisco CWDM SFP Transceivers Environmental and Electrical Specifications for Cisco CWDM SFP Transceivers Optical Specifications for Cisco CWDM SFP Transceivers X2 Transceiver Specifications Page Page APPENDIX C Cable and Port Specifications Cables and Adapters Console Port Console Port Pinouts Connecting the Console Port to a Computer Using the DB-25 Adapter Connecting the Console Port to a Computer Using the DB-9 Adapter MGMT 10/100 Ethernet Port Supported Power Cords and Plugs Power Cords Jumper Power Cord 1 2 3 4 5 6 7 8 Page D Site Planning and Maintenance Records Site Preparation Checklist Page Contact and Site Information Chassis and Network Information INDEX A B C D E F G H I R S T V X