Connecting the Cisco SLM2008 Switch
Placement Options
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 6
3
NOTE You will need two suitable screws to mount the switch. Cisco is not responsible for
damages incurred by insecure wall-mounting hardware.
Suggested Mounting Hardware
To mount the Cisco SLM2008 switch on a wall, follow these steps:
STEP1 Determine where you want to mount the switch. Ensure that the wall you use is
smooth, flat, dry, and sturdy. Make sure the location is within reach of the power
outlet.
STEP 2 Drill two holes in the wall. Make sure the holes are 2 1/2 inches apart.
(Optional) Print this page at 100% size, cut along the dotted line and place on the
wall to drill precise spacing.
Wall Mounting Template
4-5 mm 1-2 mm
2.5-3 mm
Suggested Mounting Hardware
194478
2 ½ inches
194477