3

Connecting the Cisco SLM2008 Switch

This chapter will guide you through the hardware installation for the Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power. The following sections are included:

Placement Options, page 5

Connecting the Cisco SLM2008 Switch to the Network, page 7

Placement Options

When you choose a location for the switch, observe the following guidelines:

Make sure that the switch is accessible and that the cables can be easily connected.

Keep cabling away from sources of electrical noise, power lines, and fluorescent lighting fixtures.

Position the switch away from water and moisture sources.

To ensure adequate air flow around the switch, be sure to provide a minimum clearance of two inches (50 mm).

Do not stack free-standing switches more than four units high.

Desktop Option

For desktop acement, set the Cisco SLM2008 switch horizontally on a surface so that it sits on its four rubber feet.

Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide

5

Page 10
Image 10
Cisco Systems SLM2008RF manual Placement Options, Desktop Option