Setting Up the Cisco SLM2008 Switch | 4 |
|
Navigating the Utility | |
| |
| |
•802.1X Settings—Configure security settings that include 802.1X mode, RADIUS IP, Radius UDP port, key string or Admin State authentication mode.
•802.1X Parameter—Enable re-authentication and configure the re- authentication period or EAP timeout.
•Static MAC Address—Allows you to configure a switch port with the MAC address of one or more devices that are authorized to access the network through that port.
•Management Access List—Specifies which Source IP addresses can manage the device.
•Storm Control—Configure the maximum rate (packets per second) at which unknown packets are forwarded.
QoS
This window allows you to priortize network traffic and optimize network performance using Quality of Service (QoS) settings.
•Queue Mode—Set the queue mode priority.
•QoS Mode—Configure the QoS mode settings including QoS disabled, 802.1p, port based, or Differentiated Services Code Point (DSCP).
STP
This window you to configure and view STP settings.
•STP Settings—Configure STP settings including system priority, hello time, max age, and forward delay.
•STP Status—Displays the current STP status.
Statistics
This window displays statistics and IGMP status.
•Statistics Overview—Displays standard statistics on network traffic for each port of the device.
•IGMP Status—Displays the IGMP status for each VLAN interface.
