Advanced Configuration
STP
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 43
5
The STP > STP Status window displays the STP Status for Bridge ID and for each
port.
To display the STP status, follow these steps:
STEP1 Click STP > STP Status.
STEP 2 The STP status information is displayed.
•STP Bridge Overview
-Bridge ID—A unique identifier for this bridge, consisting of the bridge
priority and MAC address (where the address is taken from the switch
system).
-Hello Time—Displays the Hello Time value as defined on the
STP > STP Setti ngs window.
-Max Age—Displays the Max Age value as defined on the
STP > STP Setti ngs window.
-Fwd Delay—Displays the Forward Delay value as defined on the
STP > STP Setti ngs window.
-Topo log y—Displays the topology.