Advanced Configuration
Multicast
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 48
5
The Multicast > IGMP Settings window displays the current IGMP settings.
NOTE All functions listed on the Multicast > IGMP Settings window require “Enable
IGMP Snooping” to be enabled before settings will take effect.
To configure the IGMP settings, follow these steps:
STEP1 Click Multicast > IGMP Settings.
STEP 2 Configure the IGMP settings.
•Enable IGMP Snooping—Check the check box to enable IGMP Snooping
on the switch.
•Enable Unregistered IP Multicast Flooding—Check the check box to
enable Unregistered IP Multicast Flooding on the switch.
•VLAN ID—Displays the VLAN ID number.
•Enable IGMP Snooping—Check the check box to enable IGMP Snooping
on each VLAN interface.
•Enable IGMP Querying—Check the check box to enable IGMP Querying
on each VLAN interface.