Advanced Configuration
Security
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 32
5
Static MAC Address allows you to configure a switch port with the MAC address
of one or more devices that are authorized to access the network through that
port. The MAC address is bound to the ingress port specified on the list and does
not allow the MAC address to change ports. Only incoming traffic with source
addresses already stored in the static address table will be accepted as
authorized to access the network through that port. MAC addresses on the list do
not age out.
The Security > Static MAC Address window displays the current static MAC
address settings for the switch.
To configure the static MAC address, follow these steps:
STEP1 Click Security > Static MAC Address.
STEP 2 In the Add Static MAC Address section, enter the following:
•MAC Address—Enter the specific MAC address for the system to store and
decide the destination port to forward.
•VLAN ID—Enter the VLAN ID associated with the specific MAC address.
•Port—Select the port associated with the specific MAC address.