Cisco Systems SLM2008RF manual Configuring Ping, Click Admin Ping

Advanced Configuration	5
Admin

Configuring Ping

You can use a ping to see if another site on the network can be reached. Ping sends ICMP echo request packets to another node on the network.

The Admin > Ping window displays the current ping settings.

To configure the ping settings, follow these steps:

STEP 1 Click Admin > Ping.

STEP 2 Configure the Ping Parameters.

•Target IP Address—Enter the IP address of the device you want to ping.

•Count—From the drop-down menu, select the maximum count to the target IP address for each attempt.

•Time Out—From the drop-down menu, select the time out (in seconds) interval if the device does not respond.

STEP 3 To test the ping, click Test. The test results are displayed in the Ping Results section.

Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 50