Advanced Configuration

5

 

Port

 

 

 

 

 

-100 Full—Supports 100 Mbps full-duplex operation.

-1000 Full—Supports 1000 Mbps full-duplex operation.

-Disabled—Disables the port.

Flow Control—Check this check box to enable flow control.

LAG—Indicates whether the port is a LAG member.

Enable Jumbo Frames—Check this check box to enable Jumbo Frame support (up to 9 KB).

STEP 3 Click Save.

Configuring Static Link Aggregation

You can create multiple links between devices that work as one virtual, aggregate link (LAG). An aggregated link offers a dramatic increase in bandwidth for network segments where bottlenecks exist, as well as providing a fault-tolerant link between two devices. You can create up to two LAGs on the switch. Each LAG can contain up to eight ports.

Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide

20

Page 25
Image 25
Cisco Systems SLM2008RF manual Configuring Static Link Aggregation