Wireless-G Router for Mobile Broadband

Chapter 7: Setting up the Wireless-G Router for Broadband WAN and Mobile Broadband Service

Overview

This chapter covers the steps for configuring the Router for broadband WAN and mobile broadband service. If you want to configure the Router for mobile broadband service only, go to “Chapter 5: Setting up the Wireless-G Router for Mobile Broadband Service.” If you want to configure the Router for broadband WAN service only, go to “Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only.”

Before You Begin

Before you begin, make sure that you have the following:

your activated Mobile Broadband Data Card

your Mobile Broadband Data Card Service information.

broadband modem

settings for your broadband Internet connection type.

The information about your Mobile Broadband Data Card was included with your Mobile Broadband Data Card package. If you do not have this information, contact the mobile broadband service provider’s customer support.

IMPORTANT: If you do NOT have your Mobile Broadband Data Card you cannot configure the Router for mobile broadband service. However, you can configure the Router for broadband WAN service; for instructions, proceed to “Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only.”

IMPORTANT: If you do NOT have broadband WAN service, then you cannot configure the Router for broadband WAN service. However, you can configure the Router for mobile broadband service; for instructions, proceed to “Chapter 5: Setting up the Wireless-G Router for Mobile Broadband Service.”

IMPORTANT: Make sure your Mobile Broadband Data Card is activated before starting the setup. If you have not already done so, follow the instructions provided in your Card’s documentation.

Chapter 7: Setting up the Wireless-G Router for Broadband WAN and Mobile Broadband Ser-

39

vice

Page 49
Image 49
Cisco Systems WRT54G3G-ST manual Overview