Cisco Systems WRT54G3G-ST manual Placement Options, Stand Option

Wireless-G Router for Mobile Broadband

Placement Options

There are three ways to place the Router. The first way is to place it horizontally on a surface, so it sits on its four rubber feet. The second way is to stand the Router vertically on a surface. The third way is to mount it on a wall. The second and third options are explained in further detail below.

Stand Option

1.Line up the center of the Router’s stand with the center of the Router’s labeled edge.

2.Insert the Router into the stand.

If you want to configure the Router for mobile broadband service only, go to “Chapter 5: Setting up the

Wireless-G Router for Mobile Broadband Service.”

If you want to configure the Router for broadband WAN service only, go to “Chapter 6: Setting up the

Wireless-G Router for Broadband WAN Service Only.”

If you want to configure the Router for broadband WAN and mobile broadband service, go to “Chapter 7:

Setting up the Wireless-G Router for Broadband WAN and Mobile Broadband Service.”

Figure 4-10: Stand Attached to the Router

Chapter 4: Connecting the Wireless-G Router for Mobile Broadband 15

Placement Options