Cisco Systems WRT54G3G-ST manual

Wireless-G Router for Mobile Broadband

WPA2 Enterprise. This option features WPA2 used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) WPA2 automatically uses TKIP + AES with dynamic encryption keys. Enter the RADIUS server’s IP Address and port number, along with a key shared between the Router and the server. Last, enter a Key Renewal Timeout, which instructs the Router how often it should change the encryption keys.

Change these settings as described here, and click the Save Settings button to apply your changes or Cancel

Changes to cancel your changes.

Figure 8-22: Wireless Tab - Wireless Security (WPA2

Enterprise)

WPA Enterprise. This option features WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) First, select the type of WPA algorithm you want to use, TKIP or AES. Enter the RADIUS server’s IP Address and port number, along with a key shared between the Router and the server. Last, enter a Key Renewal Timeout, which instructs the Router how often it should change the encryption keys.

Change these settings as described here, and click the Save Settings button to apply your changes or Cancel

Changes to cancel your changes.

Figure 8-23: Wireless Tab - Wireless Security (WPA

Enterprise - TKIP)

Figure 8-24: Wireless Tab - Wireless Security (WPA Enterprise -

Chapter 8: Configuring the Wireless-G Router for Mobile Broadband AES) 65

The Wireless Tab - Wireless Security